Setup Guide - iRobot Roomba 900 Owner's Manual

EN

Setup Guide

Follow these three simple steps to get started with your Roomba vacuum
cleaning robot. For additional operating instructions see page 8.
Step 1: Activate Roomba
• In an uncluttered area, place the Home Base® charging station
flat against a wall on a level floor surface. Refer to page 17 for
tips on optimizing the position of the Home Base.
• Plug one end of the line cord into the Home Base and the other
into a wall outlet.
• Remove the yellow bin insert and battery pull tab from beneath
the robot.
• Place Roomba onto the Home Base, making sure the metal
charging contacts on the Home Base match up with those
underneath the robot.
• If successful, you will hear a series of tones. Once the CLEAN
button illuminates, Roomba is ready for use.
Step 2: Start Cleaning Cycle
• Press CLEAN once to wake up Roomba.
• Press CLEAN again to start a cleaning cycle.
6 Roomba 900 Series Owner's Guide
®
• Roomba cleans an entire level of your home during one
cleaning cycle.
• If its battery gets low before finishing a cleaning cycle, Roomba
returns to the Home Base to recharge. After its battery has been
recharged, Roomba automatically resumes, completes the
cleaning cycle, and returns to the Home Base.
• If the Home Base is inaccessible, Roomba will not be able to recharge.
It will return to its starting location and the cleaning cycle will end.
Note:
Roomba ships with a partial battery charge. If you start a cleaning
cycle before charging the battery fully, Roomba may return to the Home Base
to recharge sooner than it will during future cleaning cycles.
Step 3: Download the iRobot HOME App
• The iRobot HOME App allows you to use your iOS or Android smart
device to help you have the best possible experience with Roomba.
• For more information on the iRobot HOME App, see next page.
• To download the iRobot HOME App, search "iRobot HOME" on the
App Store or on Google Play™, or visit: www.irobot.com/app.
Note:
If you require additional support during setup, refer to the
troubleshooting steps within the iRobot HOME App or contact Customer
Care via the app shortcuts.