Basic Operating Instructions - iRobot Roomba 900 Owner's Manual

EN
Basic Operating
Instructions
8 Roomba 900 Series Owner's Guide
®
Cleaning with Roomba
Important:
Before using Roomba for the very first time, you must activate
the battery. See Step 1: Activate Roomba on page 6 for instructions.
To wake up Roomba, press CLEAN once. Roomba will beep and
the CLEAN button will illuminate.
• To start a cleaning cycle, press CLEAN again.
» Roomba cleans an entire level of your home during one
cleaning cycle.
» If its battery gets low before finishing, Roomba returns to the
Home Base to recharge. After its battery has been recharged,
Roomba automatically returns to where it left off and completes
the cleaning cycle.
• To pause Roomba during a cleaning cycle, press CLEAN.
» To resume the cleaning cycle, press CLEAN again.
» To send Roomba back to the Home Base, press
• To end the cleaning cycle and put Roomba in standby mode,
press and hold CLEAN until Roomba's indicators turn off.
Note:
The actions listed above can also be managed from the iRobot
HOME app.
(Dock)