Set-Up Guide - iRobot Roomba 900 Owner's Manual

UK

Set-Up Guide

Follow these three simple steps to get started with your Roomba vacuum
cleaning robot. For additional operating instructions, see page 8.
Step 1: Activate your Roomba
• In an uncluttered area, place the Home Base® charging station flat
against a wall on a level floor surface. Refer to page 17 for tips on
optimising the position of the Home Base.
• Plug one end of the line cord into the Home Base and the other
into a wall socket.
• Remove the yellow bin insert and battery pull tab from beneath
the robot.
• Place the Roomba onto the Home Base, making sure that the
metal charging contacts on the Home Base match up with those
underneath the robot.
• If successful, you will hear a series of tones. Once the CLEAN
button illuminates, the Roomba is ready for use.
Step 2: Start Cleaning Cycle
• Press CLEAN once to wake up the Roomba.
• Press CLEAN again to start a cleaning cycle.
6 Roomba 900 Series Owner's Guide
®
• Roomba cleans an entire level of your home during one
cleaning cycle.
• If its battery gets low before finishing a cleaning cycle, the Roomba
returns to the Home Base to recharge. After its battery has been
recharged, the Roomba automatically resumes, completes the
cleaning cycle and returns to the Home Base.
• If the Home Base is inaccessible, the Roomba will not be able to
recharge. It will return to its starting location and the cleaning cycle
will end.
Note:
The Roomba is shipped with a partial battery charge. If you start a
cleaning cycle before charging the battery fully, the Roomba may return to the
Home Base to recharge sooner than it will during future cleaning cycles.
Step 3: Download the iRobot HOME App
• The iRobot HOME App allows you to use your iOS or Android
smart device to help you have the best possible experience with
your Roomba.
• For more information on the iRobot HOME App, see the next page.
• To download the iRobot HOME App, search "iRobot HOME" on the
App Store or on Google Play™, or visit: www.irobot.com/app.
Note:
If you require additional support during set-up, refer to the
troubleshooting steps within the iRobot HOME App or contact Customer
Care via the app shortcuts.