Blade Assemblies; Grinding And Grating Mills; Correct Disposal - Kenwood BLP60 Instruction Manual

blade assemblies

blender and multi mill
G
Remove the blade unit from the
goblet or mill by turning to the
unlock position

grinding and grating mills

G
Remove the lid from the blade
assembly.
1 blender/multi mill: remove and
wash the sealing ring.
2 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the
blade unit in water.
3 Leave to dry upside down.
other parts
Wash by hand, then dry.
service and customer
care
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you experience any
problems with the operation
of the blender, before calling
for assistance refer to the
troubleshooting guide.
UK
If you need help with:
G
using your appliance or
G
servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood customer care on 023
9239 2333. Have your model
number (ie BLM60 or BLP60)
and date code (5 digit code ie
13L35) ready. They are on the
underside of the power unit.
G
spares and attachments
call 0844 557 3653.
G
other countries
Contact the shop where you bought
your appliance.
G
Designed and engineered by
Kenwood in the UK.
G
Made in China.
to release.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product
must not be disposed of as urban
waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
guarantee (uk only)
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
G
you have not misused, neglected or
damaged it;
G
it has not been modified (unless by
Kenwood);
G
it is not second-hand;
G
it has not been used commercially;
G
you have not fitted a plug incorrectly;
and
G
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
11