Usb Transfer; Transferring Music - Sony SHAKE-X7D Operating Instructions Manual

Table of Contents

Advertisement

USB Transfer

Transferring music

You can transfer music from a sound
source to a USB device connected to
the
(USB) 2 port.
The audio format of files transferred by
this system is MP3. However, you can
also transfer WMA and AAC files from
USB 1.
Notes
Do not remove the USB device during
transfer or erase operations. Doing so
may corrupt the data on the USB device
or damage the USB device itself.
MP3/WMA/AAC files are transferred
with the same bit rate as the original
files.
When transferring from TUNER,
AUDIO IN 1 or AUDIO IN 2 function, or an
AUDIO CD, you may select the bit rate
before transferring.
USB transfer and erase operations are
prohibited when the disc tray is opened.
Note on copyright-protected
content
The transferred music is limited to
private use only. Use of the music
beyond this limit requires permission
of the copyright holders.
To select USB memory
See page 19.
To select the bit rate
You can select a higher bit rate to
transfer music with better quality.
1
Press OPTIONS.
2
Press
/
RATE", then press
3
Press
/
bit rate you want, then press
30
GB
repeatedly to select "BIT
.
repeatedly to select the
128 KBPS: encoded MP3 tracks
have smaller file size and lower
audio quality.
256 KBPS: encoded MP3 tracks
have bigger file size but higher
audio quality.
To exit OPTIONS menu, press
OPTIONS.
Transferring music from a
disc, a USB device or an
analog audio source
You can transfer music to a USB device
connected to
follows:
Synchronized Transfer: Transfer all
musics from a disc or USB 1 to USB 2.
REC1 Transfer: Transfer a single track
or audio file during playback.
Analog Transfer: Transfer sound from
TUNER, AUDIO IN 1, or AUDIO IN 2
function.
Use the buttons on the unit to perform
this operation.
1
Connect a transferable USB device
to the
below.
Note
You can use a USB adaptor (not
supplied) to connect the USB device to
the unit if the USB device cannot be
.
plugged into the
(USB) 2 port as
(USB) 2 port as shown
USB device
(USB) port.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shake-x3d

Table of Contents