Denon DHT-1312XP Service Manual page 21

(11) "Finished!!" is displayed. Click the "OK"" button.
(12) Set the switch of "Writing Kit" (Refer to the table below).
DSPBOOT CE
H H
(13) Press the "RESET" switch of "Writing Kit".
(14) AV receiver is power on and starts update of DSP1.
(15) "Write Comleted" is displayed in the FL tube.
(16) Set the switch of "Writing Kit" (Refer to the table below).
DSPBOOT CE
H H
(17) Press the "RESET" switch of "Writing Kit".
DSP SF2
(18) Click the "Resend" button.
EPM CNVSS
H H
EPM CNVSS
L H
"Connected" is displayed, it is OK.
XXXX
XXXX
21