Charging Battery (Ssb 400 W/480 W); Filling Fresh Water Tank - Alto SSB 400 W Operating Instructions Manual

SSB 400 W
SSE 400 W
SSB 480 W
SSE 480 W
2.1.6 Charging battery
SSB 400 W/480 W

2.1.7 Filling fresh water tank

38
CAUTION!
Danger of electric shock!
Do not lay tools or parts on
battery or battery poles and
do not handle with wet
hands.
Before working on the
machine:
• Switch off all switches on
the control panel.
• Observe battery handling
instructions (Chapter 3.5).
Charge batteries for initial use:
• Connect battery charging
set to charging plug on back
of machine.
• Switch on charging set.
The charging time is approx.
12-14 hours, depending on
the battery charge level.
Only original charging sets
with an automatic controller
may be used, as they adhere
exactly to the specified
characteristic curve and
switch off automatically
after completing charging.
• Fill fresh water tank with
water.
• Add cleaning agent in
required concentration (see
product label for dosage).
We recommend the use of
Alto cleaning agents
(Chapter 4.2).
WARNING!
Use only low-foam cleaning
agents which are expressly
approved for use in automatic
cleaning machines.
If foam develops in the dirty
water tank, add antifoam
agent.