Table of Contents
Advertisement
2.5
Power menu
The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power Management
(APM). Select an item then press <Enter> to display the configuration options.
Main
Advanced
ACPI Suspend Type
ACPI APIC support
APM Configuration
Hardware Monitor
F1:Help
ESC: Exit
2.5.1
ACPI Suspend Type [S1&S3]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend.
Configuration options: [S1 (POS)] [S3(STR)] [S1&S3]
2.5.2
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
2.5.3
APM Configuration
Restore on AC Power Loss
HDD Down In Suspend
PWR Button < 4 secs
Power On By PCI/PCIE Devices
Wake On LAN After AC Power Loss
Power On By External Modems
Power On by RTC Alarm
x Date (of Month) Alarm
x Alarm Time (hh:mm)
HPET Support
Power Up By PS/2 Mouse
Power Up By PS/2 Keyboard
F1:Help
ESC: Exit
2-26
Phoenix-Award BIOS CMOS Setup Utility
Power
Boot
Exit
↑↓ : Select Item
→← : Select Menu
Phoenix-Award BIOS CMOS Setup Utility
Power
APM Configuration
↑↓ : Select Item
→← : Select Menu
[S1&S3]
[Enabled]
-/+: Change Value
Enter: Select Sub-menu
[Disabled]
[Disabled]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
0
0 :
0 :
0
[Enabled]
[Disabled]
[Disabled]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Select the ACPI state
used for System
Suspend.
F5: Setup Defaults
F10: Save and Exit
Select Menu
Item Specific Help
Select system power
state when AC Power
returns.
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup
Advertisement
Table of Contents
