Setup Options; Initializing The Receiver; Initialize - Magellan eXplorist XL User Manual

Press MENU and use the UP/DOWN
ARROWs to highlight LAST FIXES and
press ENTER. Use the LEFT/RIGHT
ARROWs to select any Last Fix except
+LFX01. Press the UP ARROW. Use
the LEFT/RIGHT ARROWs to select
any of the other fixes present in the last
fix buffer that were taken after the one
chosen as the "FROM" waypoint.
Press ENTER for the Trip Summary.
If you select +LFX01 as the FROM waypoint you will not be
given the opportunity to change the "TO" waypoint since there
have been no other fixes saved since +LFX01 was recorded. A
message "SELECT OLDER STARTING FIX FOR TRIP" appears.

SETUP OPTIONS

Setup options allow you to customize your receiver to display information
in the format that best suits your needs.

Initializing the Receiver

This option was discussed in more detail earlier, but, in general,
INITIALIZE allows you to input the approximate coordinates, time, and
date for your present position if the receiver has computed a position
fix or if it has had its memory cleared. This function should also be
used any time the unit is moved more than 300 miles with the unit
turned off, to help the receiver acquire a fix faster.
MENU
For a more detailed description, refer to section on First Time
Use - Initializing the Receiver.
42
Highlight

INITIALIZE

SETUP
Press ENTER
Press ENTER
Use ARROW KEYS
Highlight
to enter coordinate
information