Editing A Waypoint - Magellan eXplorist XL User Manual

Use the UP/DOWN and LEFT/RIGHT ARROWs to key in the distance
at which you wish to project the new waypoint. When you have
finished, press ENTER to confirm and continue.
The cursor appears in the bearing field
(BRG). Use the UP/DOWN and LEFT/
RIGHT ARROWs to key in the bearing
at which you wish to project the new
waypoint. When you have finished,
press ENTER to confirm.
The coordinates of the projected
waypoint you have just created appear
on the WPT PROJECT screen.
To save these coordinates as a
waypoint, press ENTER to access the
DEFINE WPT screen, assign a name
using the UP/DOWN and LEFT/RIGHT
ARROWs, then press ENTER.
The projected waypoint is saved as a new waypoint and the display
returns to the WAYPOINT screen from which you projected the new
waypoint.

Editing a Waypoint

This enables you to rename a waypoint (optional) and to change the
coordinate values for the waypoint.
Highlight
MENU
WAYPOINTS
Press ENTER
optional:
Use ARROW KEYS to
rename waypoint
Use ARROW
KEYS to change
elevation value.
Press MENU, use the UP/DOWN ARROWs to select WAYPOINTS
and press ENTER. Select a waypoint from the list and press ENTER to
access the WAYPOINT screen. Press ENTER to access the function
menu, highlight EDIT and press ENTER.
Use ARROW
ENTER
KEYS to select
waypoint
ENTER
ENTER
ENTER
Press ENTER
Use ARROW KEYS to change
position coordinates. Press
ENTER to move to the next line.
Highlight
EDIT
29