7. Plug the EVSE into the charge receptacle. Push the EVSE in firmly until it is completely
engaged (if not completely engaged the vehicle may not charge).
NOTE:
•
The vehicle will initiate the charging
cycle automatically when all the condi-
tions are satisfied.
•
The vehicle battery gauge will show
the pattern for charging.
•
Do not use an extension cord with
the EVSE.
•
To remove the EVSE push the button
on the connector and pull firmly to
remove it from the vehicle' s charge
receptacle.
8. Close the charge receptacle door.
NOTE:
•
In the event of an error in the charging
process the AC power to the vehicle will
stop and a red indicator will illuminate
on the EVSE.
•
Keep the door for the charge receptacle
closed when not in use.
GETTING STARTED
17