Horizon Fitness Titan XP90 Installation And Operation Manual

Horizon Fitness Titan XP90 Installation And Operation Manual

Hide thumbs Also See for Titan XP90:

Advertisement

Horizon® Titan XP90-Installation
USING THE ENERGY STAR
A BRIEF INTRODUCTION TO THE MARK GUIDELINES
and Operations Manual
MARKS CORRECTLY
®
KEY GUIDELINES
Air Cleaning Equipment, Inc.
Neither the marks nor the ENERGY STAR name may
be used in any other organization name, product
name, service name, domain name, or Web site title.
sales@horizondehumidifiers.com
The marks may never be associated with products,
homes, or buildings that do not qualify as
14021 NC Hwy 50, Surf City, NC, 28445
ENERGY STAR.
The marks may not be altered, cut apart, separated,
Phone:(919) 258-3330x3
or otherwise distorted in perspective or appearance.
This includes removing the words ENERGY STAR
Fax: (919)258-3394
from the mark.
If your organization is not an ENERGY STAR partner,
but offers ENERGY STAR certified products, you
must include the name of the manufacturer near the
ENERGY STAR mark.
The color for the mark is ENERGY STAR blue (100%
Cyan); the Web color equivalent is hex color
#00AEEF. Alternate versions in black or reversed out
to white are allowed, but Cyan is preferred.
PROPER USE OF THE ENERGY STAR MARKS
CERTIFICATION MARK
1
Use the Certification Mark as a label on products, homes, and buil
ENERGY STAR requirements. The mark should be used only on or n
home, or building. This mark may only be used by active ENERGY S
partnership agreement. Please see the two examples of proper us
Advertisement
PARTNER MARKS
2
Use the Partner Mark to promote
your organization's commitment to
and partnership in the ENERGY STAR
program. This mark may only be used
by ENERGY STAR partners who have
signed a partnership agreement.
Please see below for an example of
proper usage.
Web page
LINKAGE PHRA
4
Use
prom
orga
prod
new
ENER
ENER
Plea
usag

Advertisement

Table of Contents
loading

Summary of Contents for Horizon Fitness Titan XP90

  • Page 1 Horizon® Titan XP90-Installation and Operations Manual PROPER USE OF THE ENERGY STAR MARKS USING THE ENERGY STAR MARKS CORRECTLY ® CERTIFICATION MARK A BRIEF INTRODUCTION TO THE MARK GUIDELINES Use the Certification Mark as a label on products, homes, and buil ENERGY STAR requirements.
  • Page 2: Table Of Contents

    Table of Contents Warranty Registration Safety Notes Identification Electrical Supply Principle of Operation Installation Key Functions Indicator Lights Remote Control Operating Instructions Diagram Maintenance Dehumidifier Storage Ducted Applications Troubleshooting Spare Parts Warranty Information...
  • Page 3: Warranty Registration

    Warranty Registration Congratulations on purchasing a new Horizon Dehumidifier. Your new dehumidifier comes with an extensive warranty plan. To register, simply visit: www.horizondehumidifiers.com/warranty. Be sure to note your dehumidifier serial number as you will need it for registration. Safety Notes •...
  • Page 4: Identification

    For future reference, write down the model, serial number, and date of purchase for your dehumidifier. This is extremely helpful if you need to seek assistance in the future. The data label on the side of your unit has key characteristics of your specific unit. Model Number: Horizon Titan XP90 Serial Number: Date of Purchase: For additional questions concerning your dehumidifier, the following options are available:...
  • Page 5: Key Functions

    If the unit is handled in such a manner that the compressor did not remain in the upright position, it is necessary to place on a level surface and wait a minimum of 2 hours before turning the unit “on” Step #2: Set Up Drain Line The included drain line attaches to unit via a compression type fitting on the discharge end of the unit.
  • Page 6: Indicator Lights

    4. Sensor Location Button • • Press this button to switch the dehumidifier between “unit” and “remote” mode. (See Horizon Re- mote Control Instructions for further details). • • This button is only active when a Horizon Remote Control has been connected to unit. 5.5.
  • Page 7: Remote Control

    •• Once the compressor light switches to green, it indicates the compressor is in working status. 5. Unit Indicator Light • • When the unit indicator light is red, it illustrates the dehumidifier is in unit mode. •• While in unit mode, the dehumidifier will use it’s built-in humidity sensor. If using a re- mote control, unit mode will allow you to remotely monitor the room conditions where the dehumidifier is located.
  • Page 8: Operating Instructions

    The drain will operate for 15 seconds each time the button is pushed. IT may be necessary to press the button more than once to completely empty the reservoir Horizon Titan XP90 Diagram • Front View...
  • Page 9: Maintenance

    Always unplug the unit before doing any maintenance. Condensate Pump Your Titan XP90 is equipped with an integral condensate pump designed to pump water from your de- humidifier out to the desired drain. This pump requires routine maintenance that is not covered by your 1 year parts warranty.Only a defective pump will be repaired or replaced during the warranty period.
  • Page 10: Dehumidifier Storage

    Cleaning/Disinfecting the Pump Basic Cleaning 1. Press the drain button to drain the water from the reservoir. 2. Disconnect power to the dehumidifier. 3. Mix a 16 oz solution of either (1 oz bleach + 15 oz water) OR (4 oz white vinegar+ 12 oz water). 4.
  • Page 11: Ducted Applications

    Ducted Applications Ducting the dehumidifier allows the unit to be in one room while conditioning an adjacent room. The inlet/return grille is designed for 12” flex ducting while the supply grille is designed for 6” flex ducting. Be sure to secure the ducting with tie wrap. Also, keep in mind, that the supply ducting can be screwed into an adapter if necessary.
  • Page 12: Troubleshooting

    Troubleshooting Symptom Cause Solution Power Supply Verify that there is power to the outlet and that the plug is properly installed in outlet Room Temperature Over 105° The unit is outside the operating Machine Won’t Run Machine Won’t Run (Display HI) or Below 33° (Display temperature range.
  • Page 13: Spare Parts

    Titan XP90 Spare Parts Internal Components Internal Components Remote Control Remote Control T-908 Compressor Remote Control T-100 Assembly (Includes T-909 Compressor Capacitor T-101 and T-102) Temp/RH Sensor T-910 Cable T-101 Titan Remote Control T-911 Display Ribbon Cable Coil Temp Sensor...
  • Page 14 Warranty Seller warrants the equipment to be free from defects in workmanship and materials for a period of 12 months after shipment (60 months/5 years on compressor, evaporator and condenser). This war- ranty is limited, however, to the repair or replacement of defective equipment. If it is necessary to re- turn unit for service, customer is solely responsible for proper packaging and transportation costs.

Table of Contents