Chapter 13: Selecting Destinations; Destination Screen; Country Selection (Globe Button); Entering And Routing To Your Home Address - Magellan RoadMate 800 Reference Manual

Chapter 13: Selecting Destinations

13.1 Destination Screen

Map Button – page 34
Home Button – page 42
Globe Button – page 42

13.2 Country Selection (Globe Button)

Country selection is used to help speed up searching by narrowing down the database. Before
entering a destination, make sure you select the country where your destination is located. To
select the country, select the
current destination country is displayed at the top of the Destination screen.

13.3 Entering and Routing to Your Home Address

The Magellan RoadMate enables you to enter an address to assign to your Home button. The
Home button allows you one touch access to the address you route to most often. Select the
Home
button.
If this is the first time using this button, you will be prompted to enter an address. Select
Select either Search by City, Search by Zip Code, or Search by State. For this example select
Search by CIty
.
Enter characters that start a word within the city name (see "Multi-Word Indexing" on page 32). Select
Navigation key to scroll the list up or down (if necessary) and select the desired city.
Enter characters that start a word within the street name (see "Multi-Word Indexing" on page 32). Do not enter prefixes such
as "North" or "N", or the type of street such as "Ave." or "Street". Select
down (if necessary) and select the desired street.
Enter the address. The acceptable range of street numbers is displayed at the top of the screen. Enter the street number and
Done
select .
At this point you can choose to edit the information or, if you are finished, select
Globe
button then, select the country you wish to search. The
OK
. Use the Navigation key to scroll the list up or
Save
42
Current Country for Destination – page 42
Select Address – page 43
Address Book – page 47
Points of Interest – page 62
Intersection – page 67
Yes
.
OK. Use the
.