Remote Control - ViewSonic PJD6220 User Manual

Remote Control

Power
1
Turn the projector on or off.
Four directional buttons
2
-Use four directional buttons to
select items or make adjustments
to your selection.
- The right button acts as Blank
Screen function. Cut off the screen
temporarily. Press again to cancel
the Blank Screen function.
MENU
3
Display or exit the on-screen display
menus.
Laser
4
Aim the remote at the viewing
screen, press and hold this button
to activate the laser pointer.
Four directional buttons
5
(Computer mode only)
Act as computer keyboard (four
directional buttons). This function
is only available when the projector
is connected to a computer via a
USB cable.
Left (Computer mode only)
6
Act as mouse left button. This
function is only available when the
projector is connected to a computer
via a USB cable.
ViewMatch
7
Switch in between high brightness
performance or
performance.
Source
8
Manually select an input source.
Right (Computer mode only)
9
Act as mouse right button. This
function is only available when the
projector is connected to a compute r
via a USB cable.
Enter
10
Confirm the selection.
Freeze
11
Press "Freeze" to pause the
screen image.
Press again to cancel the Freeze
function.
ViewSonic
Accuracy color
7
http://www.pureglare.com.au
1
2
3
4
5
6
7
PJD6220/PJD6230/PJD6240
11
10
9
8