Configuring Dhcp Relay - ZyXEL Communications GS1920 series User Manual

Click the VLAN Configuration link in the Static VLAN screen and then the VLAN Port Setup link
8
in the VLAN Configuration screen.
Figure 39 Tutorial: Click the VLAN Port Setting Link
Enter 102 in the PVID field for port 2 to add a tag to incoming untagged frames received on that
9
port so that the frames are forwarded to the VLAN group that the tag defines.
10 Click Apply to save your changes back to the run-time memory.
Figure 40 Tutorial: Add Tag for Frames Received on Port 2
11 Click the Save link in the upper right corner of the web configurator to save your configuration
permanently.

6.3.3 Configuring DHCP Relay

Follow the steps below to enable DHCP relay on the Switch and allow the Switch to add relay agent
information (such as the VLAN ID) to DHCP requests.
Click IP Application > DHCP > DHCPv4 and then the Global link to open the DHCP Relay
1
screen.
Select the Active check box.
2
Enter the DHCP server's IP address (192.168.2.3 in this example) in the Remote DHCP Server 1
3
field.
Select default1 or default2 in the Option 82 Profile field.
4
Chapter 6 Tutorials
GS1920 Series User's Guide
50