Listening To Audio From A Pc, Etc - Technics SU-C700 Operating Instructions Manual

Listening to audio from a PC, etc.

You can connect the digital audio input terminal [PC] and a PC, etc. with a USB cable and play back music on the PC, etc. with
this unit.
Connecting to a PC
Before connecting to a PC, follow the steps below.
≥ Refer to the following for the recommend OS versions for your PC:
– Windows Vista, Windows 7, Windows 8, Windows 8.1
– OS X 10.7, 10.8, 10.9, 10.10
1 Download and install the dedicated driver to the PC. (Only for Windows OS)
Download and install the driver from the website below.
www.technics.com/support/
2 Download and install the dedicated app "Technics Audio Player" (free of charge) on your PC. (Common to both Windows
OS and OS X)
Download and install the app from the website below.
www.technics.com/support/
1
Disconnect the AC mains lead.
2
Connect this unit and a PC, etc.
e.g.,
PC, etc.
Type A
USB 2.0 cable
(not supplied)
3
Connect the AC mains lead to this unit, and raise the power switch lever to the [Í/I] position.
( 12)
4
Press [N INPUT O] below [AMP] repeatedly to select "PC".
5
Operate the PC, etc. for playback.
6
Press [r VOL s] to adjust the volume.
≥ OS X is a trademark of Apple Inc., registered in the U.S. and other countries.
≥ Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
This unit
(rear)
Type B
(as of November 2014)
15