GMC T-Series 1999 Owner's Manual page 314

Scheduled Maintenance (DURAMAX
(44) = Air brake service: Remove, disassemble, clean
and inspect the safety valve, standard brake chamber,
quick release valve, quick release/double check valve
combination, parking brake control valve, double check
valve, pressure protection valve and alcohol injector.
Remove, disassemble and clean the application valve;
replace parts showing wear. Remove, disassemble, clean
and inspect the spring brake control valve; replace
rubber parts.
(45) = For Stud Piloted Wheels Only: Tighten the wheel
stud nuts to the specified torque values at 100 miles
(160 km), 500 miles (800 km) and 1,000 miles
(1 600 km) and then every 1,000 miles (1 600 km)
thereafter. See "Tightening the Wheel Nuts" in
the Index.
7-52
t
DIESEL)
(46) = For Hub Piloted Wheels Only: Tighten the wheel
stud nuts to the specified torque values at 1,000 miles
(1 600 km). Thereafter, tighten them 1,000 miles
(1 600 km) after each time the wheel is removed. See
"Tightening the Wheel Nuts" in the Index.
yellowblue