Kenwood DDX7015BT Instruction Manual page 59

SETTINGS SETTINGS
Locking the settings
You can lock the settings to prevent them from
being changed.
• is shown beside the settings that can be
locked.
1
Display the <SETUP Memory> screen.
(Page 58)
2
To unlock the setting: Press [Unlock].
Updating the system
You can update the system by connecting a USB
device containing an update file.
• To update the system, visit <http://www2.
jvckenwood.com/cs/ce/>.
1
Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 70 .
2
Display the <System Information>
screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
3
<Application Updates the system
Version>
application.
<System Version> Updates the system.
<Bluetooth
Updates the Bluetooth
Version> application.
It may take a while.
If the update has been completed successfully,
"Update Completed" appears. Reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1
Display the <Touch Panel Adjust> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
ENGLISH 59