Initial Settings - Kenwood DDX7015BT Instruction Manual

INITIAL SETTINGS

INITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 60)
1
*
<Demonstration>
Activate or deactivate the
(Page 61) display demonstration.
<Language>
Select the text language
(Page 62) used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Angle>*
Adjust the panel angle.
(Page 8)
<R-CAM Select [ON] when
Interrupt>
connecting the rear view
(Page 61) camera.
<Panel Color> Select the color of the
(Page 57) buttons on the monitor
panel.
4
2
Finish the procedure.
The <TOP MENU> screen is displayed.
* Only for DDX7015BT/DDX715WBT .
Setting the security function
Registering the security code (only for
DDX7015BT/DDX715WBT)
You can set a security code to protect your receiver
system against theft.
1
Display the <TOP MENU> screen.
On the source control screen:
2
Display the <System> setting screen.
3
Display the <Security Code Set> screen.
• Press [K] repeatedly to change the page on
the <System> menu screen.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.
4
Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5
Repeat step 4 to confirm your security
code.
Now, your security code is registered.
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].