Mackie Onyx 80 Series Owner's Manual page 24

This is a standard 3-prong IEC power connector.
Connect the detachable linecord (included in the box
with your Onyx 80 Series) to the power receptacle, and
plug the other end of the linecord into an AC outlet.
The Onyx 80 Series has a universal power supply that
can accept any AC voltage ranging from 100 VAC to 240
VAC. No need for voltage select switches. It will work
virtually anywhere in the world. That's why we call it
a "Planet-Earth" power supply! This also means that it
is less susceptible to voltage sags or spikes, providing
greater electromagnetic isolation and better protection
against AC line noise.
This one is self-explanatory. When the POWER switch
is turned ON, power is supplied to the Onyx 80 Series
and the four POWER LEDs on the front panel light up.
Note: If the external Redundant Power Supply is con-
nected and turned on, the unit will power up regardless
of the setting of this switch.
8 7
RIGHT LEFT RIGHT LEFT
(MONO) (MONO)
AUX SEND
BAL/UNBAL
8 7 6 5
INSERT INSERT INSERT INSERT
TALKBACK
LINE
OUT
MIC
MONO RIGHT
IN
BALANCED BALANCED BALANCED
STEREO AUX INPUT
BAL/UNBAL
6 5
RIGHT LEFT RIGHT LEFT
(MONO) (MONO)
4 3 2 1
INSERT INSERT INSERT INSERT
MAIN OUTS
MAIN
INSERT
L L
LEFT
R R
(TIP=SEND
BALANCED BAL/UNBAL RING=RETURN)
4 3
RIGHT LEFT RIGHT LEFT
(MONO) (MONO)
GROUP SEND
BAL/UNBAL
8 7 6 5
INSERT INSERT INSERT INSERT INSERT
MONITOR MATRIX REDUNDANT
OUT OUT
POWER SUPPLY
BAL/UNBAL BAL/UNBAL
L A
R B
2 1
RIGHT LEFT RIGHT LEFT
(MONO) (MONO)
4 3 2 1
INSERT INSERT INSERT
~ 100-240VAC
50-60Hz 240W
FUSE: 5A SLO-BLO
POWER