Safety Belt Extender; Replacing Restraint System Parts After A Crash; Checking Your Restraint Systems - GMC C-Series 2001 Owner's Manual

Table of Contents

Advertisement

Safety Belt Extender

If the vehicle's safety belt will fasten around you, you
should use it.
But if a safety belt isn't long enough to fasten, your
dealer will order you an extender. It's free. When you go
in to order it, take the heaviest coat you will wear, so the
extender will be long enough for you. The extender will
be just for you, and just for the seat in your vehicle that
you choose. Don't let someone else use it, and use it
only for the seat it is made to fit. To wear it, just attach it
to the regular safety belt.

Checking Your Restraint Systems

Now and then, make sure the safety belt reminder light
(if your vehicle has one) and all your belts, buckles,
latch plates, retractors and anchorages are working
properly. Look for any other loose or damaged safety
belt system parts. If you see anything that might keep a
safety belt system from doing its job, have it repaired.
Torn or frayed safety belts may not protect you in a
crash. They can rip apart under impact forces. If a belt is
torn or frayed, get a new one right away.
Replacing Restraint System Parts
After a Crash
If you've had a crash, do you need new belts?
After a very minor collision, nothing may be necessary.
But if the belts were stretched, as they would be if worn
during a more severe crash, then you need new belts.
If belts are cut or damaged, replace them. Collision
damage also may mean you will need to have safety belt
or seat parts repaired or replaced. New parts and repairs
may be necessary even if the belt wasn't being used at
the time of the collision.
1-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents