Table of Contents
Advertisement
BLUETOOTH OPERATION
Pair and Connect
Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile
phone for the
1.
In any mode, prior to pairing and connecting, the BT logo
that no device is connected. To begin pairing, enable BT mode on your mobile phone.
2.
When the phone
3.
Choose the BOSS AUDIO from the device list to pair and connect with the car audio
system. Upon
4.
When pairing is complete, the mobile phone audio will automatically transfer to the car
audio system whenever a call is made or received, or when the mobile phone plays
music.
Make a Call
To make a call, dial the call directly from the paired mobile phone.
Redial Last Dialed Number
Press and hold the
Answer a Call
When the mobile phone is called, the incoming telephone number displays in the LCD.
To receive the call, press the
To reject the call, press the
End a Call
To end an active call, press the
Switch Audio Between Car and Phone
During a call, press the VOL knob/button to switch the audio source from the car audio
system back to your mobile phone.
Adjust Talk Volume
During a call, use VOL knob or VOL + and VOL - buttons to adjust the volume level.
Use the MUTE button to mute sound.
Audio Streaming (A2DP)
1.
Press the
/SRC button to enter BT mode and display media in the LCD.
2.
When a mobile device is paired, music played through that device will automatically be
heard through the car audio system.
3.
Press the >>| or |<< button to play the next or previous
4.
Press the >|| button to pause or resume music playback.
6
time, you must pair and connect the two devices as follows:
the car audio system, the BOSS AUDIO name will be displayed.
the BT logo will stop
button on the control panel to redial the last dialed phone number.
button on the control panel.
button.
button on the control panel.
in the LCD indicating
on the mobile phone.
Hide quick links:
Advertisement
Table of Contents
