Sony DXC-C33P Instructions For Use Manual page 25

LEVEL
Adjusts the level within the range from –127
to +127. Adjust while watching the screen so
that the color is eliminated.
+: Green at the top and magenta at the
bottom will be eliminated.
–: Magenta at the top and green at the
bottom will be eliminated.
FS/TRIG IN (Foot Switch/
Target Input)
Selects the input signal from the
TRIG IN connector.
OFF
Select when neither a slave unit nor foot
switch is connected.
FS
Select when an optional foot switch is
connected. Turning on or off the foot switch
outputs a freeze picture and an image
currently shot, alternately.
TRIGGER
Select when a slave unit is connected to
synchronize the camera with a stroboscope.
Each time a trigger pulse is input, the freeze
picture changes.
When TRIGGER is selected, you cannot
output an image as a freeze picture with the
FREEZE button on the camera control
unit.
POLARITY
Selects the same polarity as that of the pulse
signal input.
: Falling edge
: Rising edge
Note
When FS/TRIG IN is set to TRIGGER or
FS, AGC, CCD IRIS, ATW, AWB, DCC+
and DYNALATITUDE modes do not
function.
NEGA
Reverses the output image to negative/
positive.
OFF
Outputs the image normally.
ON
Outputs the image reversed to negative/
positive.
FS/
FLICKER CANCELLER
When using the camera in a 60 Hz lighting
area, you can obtain images with less flicker
under fluorescent light even when
SHUTTER is set to CCD IRIS or OFF. Set
this item to OFF when you want to set
NEGA to ON.
OFF
Disables the FLICKER CANCELLER
function.
ON
Reduces flicker under fluorescent light.
25
GENERAL Menu