Sony DXC-C33P Instructions For Use Manual page 13

MENU button
6
Displays the MAIN menu on a monitor
screen. Press again to exit the menu.
When a setting menu is displayed, press
this button to return to the MAIN menu.
For menu operations, see "Operation
Through Menus" on page 16.
7 ENTER button
Selects a setting menu in the MAIN
menu. Also use this button for an AE
window setting, etc.
8 AE AREA SELECT button
Selects the AE window set with the
menu. Each press of the button selects
the AE AREA 1 or AE AREA 2. The
selected AE area is displayed on a
monitor screen for about a second.
Note
The button functions only when GAIN is
set to AGC or SHUTTER is set to CCD-
IRIS.
9 LOCK button and indicator
When you press this button to make the
indicator light, no buttons on the camera
control unit except for the ! (power)
switch function. Pressing the button
again turns off the indicator and cancels
lock mode. You can use any button. The
lock mode retains after the unit is turned
off.
AE LEVEL control
q; 2
Adjusts the auto exposure focusing point
when the camera is set to AGC or CCD-
IRIS mode. Turning the control
clockwise increases the value, and
turning it counterclockwise decreases
the value.
When SHUTTER is set to KNOB, the
shutter speed and video gain can be
adjusted with this control. Turning it
counterclockwise adjusts the shutter
speed. Turning it clockwise adjusts the
video gain. In KNOB setting, the 2
GAIN control does not function.
GAIN RED/BLUE controls
qa
Use these controls for fine adjustment of
white balance when AWB or ATW
mode is selected. Also use them to adjust
the red and blue gain when adjusting the
white balance manually. Turning the
control clockwise sets to the positive
levels. Turning it counterclockwise sets
to the negative levels.
GAIN control
qs 2
Adjusts the gain level. Turning the
control adjusts the level in the range
from 0 to 24 dB.
button
qd v
Moves the menu cursor downward. Also
use this button for an AE window
setting, etc.
qf BARS (color bars output) button
Outputs the color bar signal. Press again
to revert to video signal output.
For monitor adjustment, contact your
authorized Sony dealer.
qg CAMERA connector (20-pin)
Connects to the camera cable connector
on the camera head using the CCMC-
20P05/10/30 camera cable (not
supplied).
VIDEO OUTPUT connector
qh
(BNC type)
Outputs a composite video signal.
*
DV connector (6-pin)
qj
The connector is especially designed to
output signals in DV format that
complies with i.LINK. Used to connect
the video equipment equipped with the
DV connector.
* is a trademark of Sony Corporation
and indicates that this product is in
agreement with IEEE1394–1995
specifications and their revisions.
Location and Functions of Parts and Controls
13