Indicator Light - Fiat 500 2015 User Manual

WHAT TO DO IN EMERGENCIES
- Electronic Stability Control (ESC) Activation / Malfunction

Indicator Light

The "ESC Activation/Malfunction Indicator Light" in the instrument cluster will come on
for four seconds when the ignition switch is turned to the ON/RUN position. If the "ESC
Activation/Malfunction Indicator Light" comes on continuously with the engine running, a
malfunction has been detected in the ESC system. If this light remains on, see your
authorized dealer as soon as possible to have the problem diagnosed and corrected.
NOTE:
• The "ESC Off Indicator Light" and the "ESC Activation/Malfunction Indicator Light"
come on momentarily each time the ignition switch is turned to ON/RUN.
• Each time the ignition is turned to ON/RUN, the ESC system will be ON even if it
was turned off previously.
• ESC Activation/Malfunction Light can blink during a ESC or TC intervention.
- Generic Warning Light
The Generic Warning Light will illuminate if any of the following conditions occur: Oil
Change Request, Engine Oil Pressure Sensor Failure, External Light Failure, Fuel Cut-Off
Not Available, Parking Sensor Failure, DST System Failure.
– Electronic Throttle Control (ETC) Indicator Light
This light informs you of a problem with the system.
If a problem is detected, the light will come on while the engine is running. Cycle the
ignition when the vehicle has completely stopped and the shift lever is placed in the
PARK position; the light should turn off.
If the light remains lit with the engine running, your vehicle will usually be drivable.
However, see an authorized dealer immediately. If the light is flashing when the engine is
running, immediate service is required, and you may experience reduced performance, an
elevated/rough idle or engine stall, and your vehicle may require towing.
57