OPERATING YOUR VEHICLE
POWER SUNROOF
The power sunroof roof switch is located in the overhead console.
To Open
•
Push and hold the POWER SUNROOF
switch rearward for approximately two
seconds and the sunroof will stop at the
vented position. Push the switch a sec-
ond time and hold for approximately
one second and release, the sunroof will
open fully, then stop automatically. This is
called "Express Open." During Express
Open operation, any movement of the
sunroof switch will stop the sunroof.
To Close
•
With the sunroof in the full open posi-
tion, pull the power sunroof button and
hold it for approximately one second, the
sunroof will return to the vented position. Pull the switch a second time and hold for
approximately one second to completely close the sunroof.
Pinch Protection Feature
•
This feature will detect an obstruction in the opening of the sunroof during Express
Close operation. If an obstruction in the path of the sunroof is detected, the sunroof
will automatically retract. Remove the obstruction if this occurs. Next, push the switch
forward and release to Express Close.
NOTE:
If three consecutive sunroof close attempts result in Pinch Protect reversals, the fourth
close attempt will be a Manual Close movement with Pinch Protect disabled.
34
Power Sunroof Switch