Canon PowerShot SX60 HS User Manual page 126

● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 5. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 5.
● Once you have registered a smartphone, you can change privacy
settings for it on the camera ( = 143).
Downloaded From camera-usermanual.com Canon Manuals
6
Send images.
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
● Image transfer will begin. The screen
darkens during image transfer.
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● To cancel the connection, press the
[ ] button, press the [ ][ ] buttons
on the confirmation screen to choose
[OK], and then press the [ ] button.
You can also use the smartphone to end
the connection.
● To add multiple smartphones, repeat the
above procedures starting from step 1.
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 30) ► [
] tab ► [Wi-Fi Settings] ► [Target History] ► [Off].
● You can also send multiple images at once and change the image
size before sending ( = 138).
● You can send the current image by choosing [Send this image] on
the screen in step 6.
Using Another Access Point
When connecting the camera to a smartphone with the [ ] button or
through the Wi-Fi menu, you can also use an existing access point.
1
Prepare for the connection.
● Access the [Waiting to connect] screen.
Either follow steps 1 – 3 in "Sending to
a Smartphone Assigned to the Button"
( = 123) or steps 1 – 4 in "Adding a
Smartphone Using the Wi-Fi Menu"
( = 125).
2
Connect the smartphone to the
access point.
Before Use
Basic Guide
][ ] buttons to
Advanced Guide
] button. To add a
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, M, C1, and C2 Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
126