Before You Start; Installation Requirements; Certification; Flue Installation Manual - Rinnai RHFE-559FDT Operation & Installation Manual

Hide thumbs Also See for RHFE-559FDT:
Table of Contents

Advertisement

BEFORE YOU START

INSTALLATION REQUIREMENTS

This heater must be installed by an authorised person. The installation must conform to local regulations. The
installation must also comply with the instructions supplied by Rinnai.
Service and removal must be carried out by an authorised person.

CERTIFICATION

The Rinnai Energysaver® Range has been certified by the Australian Gas Association.
The AGA Certification Number is shown on the appliance dataplate.
No parts or functions should be modified or permanently removed from the heater.
Please keep these instructions in a safe place for future reference.

FLUE INSTALLATION MANUAL

These instructions are to be used in conjunction with the Rinnai "Energysaver Space Heater Co-Axial Flue System
Installation Manual" These components Installation Manual" supplied with flue kits ESDFK or ESKIT03.

UNPACKING THE APPLIANCE

Check for damage and missing parts. If the heater is damaged or missing any parts, contact your supplier for
advice.
Before installing the appliance, check it is labelled for the correct gas type (see label on the rear of heater).
Refer to local gas authority for confirmation of gas type if you are in doubt.

CARTON CONTENTS / ITEM CHECKLIST

Ensure that the components listed are present before proceeding with the installation.
Check you have the following:
1 x One of the following Rinnai Space Heaters
RHFE-559FDT
RHFE-1005FDT
2 x Keys for lockable control panel door.
1 x Rear Cover set, comprising of left, right and top cover panels
1 x Bolt pack containing;
* For direct flue kit `ESDFK´ installations ONLY refer to page 22 for installation details.
Rinnai
Part
Plastic inlet hose clamps
Air intake baffle ring*
Flue adapter
Stainless steal sheath clamp Large
Stainless steal sheath clamp
Securing brackets
8g x 32mm screws
150mm long cable tie
Flue lock clamp L
Flue lock clamp S
6g x 10mm button head screws
6g x 8mm pan head screws
RHFE-559FDT
4
RHFE-1005FDT
2
0
1
0
0
1
0
1
1
0
2
2
2
2
1
1
0
1
1
1
2
0
4
7
ES_FDT_OIM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rhfe-1005fdt

Table of Contents