Operating Your Tv - Beko E1 CHASSIS Service Manual

5.

OPERATING YOUR TV

A. ZAPP FUNCTİON (OPTİONAL)
Select the programme you would like to recall
by pressing SWAP button. Selected programme
number will appear on the upper left side of the
screen.
programme, you can recall the
selected one by pressing SWAP
button again. If you press SWAP
button again, you can recall the
last programme you
watched. You can cancel ZAPP function by
pressing INFO button.
B. SWAP FUNCTION
Allows you to swap between the program you
are watching and the
last selected program. i.e. If you
were watching Program 1 and
change to Program 11, press the
SWAP button to go back to
Program 1. Press it again to return to Program
11.
Note: If Zapping function is available SWAP
function will not work.
C. INFO
By pressing the "WHITE (i)" button the
programme number and programme
name (if it is exist) will appear on the
screen.
automatically after a few seconds.
Watching
This will disappear
D. TUNING THE TELEVISION
There are two ways of tuning your television:
• Manual, where you control the tuning process
or Autoprogram where the television does it all
any automatically.
• The TV sets equipped with ATS (Automatic
Tuning System) sorts the channels regarding
the broadcasting system of your country
(optionally).
Please Note
If the TV is set to a channel with no signal the
TV will return to standby after 5 minutes. The
time remaining is displayed on the screen.
Manual Tuning
Tuning the TV is accessed through the SETUP
menu.
To access the SETUP menu:
Press the MENU button twice. SETUP Menu
will appear.
a) If you don't know the channel
number (Tuning with SEARCH
function).
Enter the SETUP menu by pressing MENU
button twice.
6
In the SETUP
PROGRAM NO and change to P1
using the Program down button to
select it and the Volume up or
Volume down button to change it.
Menu select