Beko E1 CHASSIS Service Manual page 23

• Set the value of "BLACK LEVEL G" and "WHITE POINT B" to "30" and "32" with V+ / V- buttons.
• Adjust "WHITE POINT R" and "WHITE POINT G" for red and green drives
• If white balance can not be adjusted properly slightly change the values of "BLACK LEVEL G" and "WHITE
POINT B".
• Exit from Service menu.
2.4 Geometry Adjustments
• Apply the cross hatch pattern with a pattern generator to the antenna input.
• Enter Service Menu and access to GEOMETRY sub-menu
• Adjust Vertical Amplitude with "VER.AMPLITUDE" option.
• Adjust vertical centring with "VER.SHIFT", raster centring with "VER.SLOPE", vertical linearity with "S-
CORRECTION" and horizontal centring with "HOR.SHIFT".
• Adjust the vertical amplitude for 16:9 mode with "VER.AMP.16:9"
• Adjust the centring of the OSD Menu with "HOR.OSD.POS" and "VER.OSD.POS".
• Adjust the contrast of the OSD and Teletext with "OSD CON" and "TXT CON"
• Exit from the Service Menu.
2.7 Options Menu
Enter the Service Menu with the Service RC and and access to OPTION sub-menu and check the adjusted values
are same as below.
TUNER : Phillips, Sharp&Alps, Panasonic, Temic.
Note : Select Sharp&Alps when Samsung tuner is used.
ACG(UHF) : Automatic Gain Control for UHF Band
ACG(VHF) : Automatic Gain Control for VHF Band
AGC(LPRIME) : Automatic Gain Control for SECAM LL' Systems.
TYPE : Label(sorts according to the catching order), ATS(Automatic Tunning System)
STANDBY : CUSTOMER MODE (the units starts up in St.by mode,default value),
FACTORY MODE(the unit directly goes to ON mode, can be used during repair)
AV1 SVHS : ON(SHVS from Scart one is available), OFF
AV2 : ON(Scart 2 is available), NO
SOUND : BG, I, BG+DK, BG+LL'
BG : Europe, New Zelland, Australia
TEXT : NON-TEXT, FASTEXT
ON TIMER : ON(available) OFF(unavailable)
4-KEY : INTERNAL( ), EXT.3 KEY(front panel with 3 button), EXT.4KEY(front panel with 4 button)
BLUEBLACK : ON(blueblack acticated), OFF(Blueblack inactivated)
AUTO WSS : ON(Autosense of Widescreen), OFF
CHILD LOCK : ON(hinders children access), OFF
ZAPP : ON(Zapp available), OFF
PROTECTION : The period of getting into protection
SIMPLE HOTEL : ON(Hotel mode, available), OFF
MAX VOLUME : Used for Hotel Mode, limits the max volume in hotel mode
RGBIN : ON (When Scart RGB exists, aerial isn't showed–for only for some Hotel TVs), NO (Default)
2.7 Hotel Mode
If "Simple Hotel" option in the Service Menu is selected as "ON", to access set up menu "4658" should be typed
whilst the "Features Menu" is on screen. After finishing the adjustments by taking the TV to St.by or shutting down,
the access can be re-inhibited.
22