Setting The Attenuation (Att) - JRC JSS-2250 Instruction Manual

Operation
4.3.5

Setting the attenuation (ATT)

■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, after 5.4 Receiver
appears, move the cursor to 3.
Attenuation.
2 2 . .
2 .
Press ENT to move the cursor to the right,
then use the jog dial to select 6dB, 12dB,
18dB, or OFF.
After selecting and pressing ENT, the
settings are complete.
The same settings can be done by pressing and holding the
Note
4ATT
4.3.6 Setting the clarifier
■ ■
Procedure
1 1 . .
1 .
Press the
MENU
hierarchical menus, after 5.4 Receiver
appears, move the cursor to 4. Clarifier.
2 2 . .
2 .
Press ENT to move the cursor to the right, then
use the jog dial or numeric keypad to select a
value in the range of -200 to +200 Hz.
After inputting and pressing ENT, the settings
are complete.
- When using the numeric keypad,
Note
input "+" with the
"-" with the
- Pressing and holding the
key and the
same time opens a popup screen. The
same settings can be done here.
- This function is invalid in the DSC
mode or the telex mode.
4-30
key, and through
key at the same time.
key, and through
1CLAR
2SCAN key.
1CLAR key at the
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
5.4)Receiver
1.Auto gain control :Slow
2.Noise reduction
3.Attenuation
4.Clarifier
5.Squelch
6.CW bandwidth
7.Scan
0.Back
key and
FUNC
:OFF
:OFF
:+000Hz
:OFF
:Narrow
:OFF
:6dB
:+000Hz
:OFF
:Narrow
FUNC key and the
:OFF
:OFF
:+000Hz
:OFF
:Narrow
:OFF
:OFF
:+008 Hz
:OFF
:Narrow