10 Maintenance and service
Lamp replacement - direction
indicators front
The direction indicator lamp is fitted inside
the headlamp's smaller cover.
10
1. Detach the headlamp (p. 363).
2. Remove the small round cover.
3. Pull the bulb holder in order to extract the
bulb.
4. Remove the blown bulb and fit a new
one. It can only be installed in one way.
5. Fit the bulb holder in the socket and
press until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 368)
366
Lamp replacement - rear lamp
Rear direction indicators are replaced from
inside the cargo area.
Lamp housing, rear
The direction indictor bulb in the rear lamp
cluster is replaced from inside the cargo area.
1. Open the panel.
2. Remove the insulation by pulling it
straight out.
3. Loosen the bulb holder by turning its han-
dle anticlockwise.
4. Detach the bulb by pulling it straight out.
Related information
•
Lamp replacement - location of rear
lamps (p. 366)
•
Lamps - specifications (p. 368)
Lamp replacement - location of rear
lamps
The overview shows the location of the lamps
at the rear.
Position/parking lights (LED)
Brake light (LED)
Indicator (p. 366)
Side marker lamps (LED)
Reversing lamp (p. 366)
Fog lamps (p. 366)
Brake light (LED)
Related information
•
Lamp replacement - general (p. 362)
•
Lamps - specifications (p. 368)