Honda CB650F Owner's Manual page 98

2. Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Swingarm
Honda CB650F Owner's Manual
3. Adjust the drive chain.
4. Install and tighten the rear axle nut.
Slot
5. Hold the adjusting bolts and tighten the
lock nuts.
6. After installing the wheel, apply the brake
pedal several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
Lug
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
http://www.motorcycle.in.th
Tyre Puncture
Torque: 98 N·m (10.0 kgf·m, 72 lbf·ft).
Torque: 27 N·m (2.8 kgf·m, 20 lbf·ft).
u Removing Wheels
P. 72
2
95