Honda CB650F Owner's Manual page 95

Tyre Puncture u
10. Install the left brake caliper and tighten
new mounting bolts.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
u Use new mounting bolts when
installing the brake calipers.
NOTICE
When installing the brake calipers into position on the
fork legs, carefully fit the brake disc between the pads to
avoid scratching them.
11. Lower the front wheel on the ground.
12. Apply the brake lever several times.
Then, pump the fork several times.
92
Honda CB650F Owner's Manual
Removing Wheels
http://www.motorcycle.in.th
13. Retighten the left axle pinch bolt.
Torque: 22 N·m (2.2 kgf·m, 16 lbf·ft).
14. Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
15. Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.