Honda CB650F Owner's Manual page 97

Tyre Puncture u
5. Remove the rear axle shaft and adjusting
plates.
6. Remove the brake caliper bracket, rear
wheel and side collars.
u Support the brake caliper so that it
doesn't hang from the brake hose. Do
not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc to pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
94
Honda CB650F Owner's Manual
Removing Wheels
http://www.motorcycle.in.th
Installation
1. To install the rear wheel, reverse the
removal procedure.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.