Lincoln 2006 Town Car Workshop Manual page 16

2006 Town Car Workshop Manual
Does the actuator motor move in the counterclockwise direction?
E3 CHECK CIRCUIT 660 (YE/LG) FOR A SHORT TO GROUND
Disconnect: Recirc Door Actuator C289.
Measure the resistance between ground and EATC module C228a-10, circuit 660
(YE/LG).
Is the resistance greater than 10,000 ohms?
E4 CHECK CIRCUIT 1069 (OG/LB) FOR A SHORT TO GROUND
Measure the resistance between ground and EATC module C228a-9, circuit 1069
(OG/LB).
Is the resistance greater than 10,000 ohms?
E5 CHECK CIRCUIT 660 (YE/LG) FOR A SHORT TO VOLTAGE
Ignition ON.
Measure the voltage between ground and EATC module C228a-10, circuit 660
(YE/LG).
Is voltage present?
E6 CHECK CIRCUIT 1069 (OG/LB) FOR A SHORT TO VOLTAGE
Measure the voltage between ground and EATC module C228a-9, circuit 1069
(OG/LB).
Is voltage present?
E7 CHECK CIRCUIT 660 (YE/LG) FOR AN OPEN
Ignition OFF.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS6G/~MUS~LEN/19/...
Yes
GO to E4.
No
REPAIR circuit 660 (YE/LG) for a short to ground. CLEAR the DTCs. REPEAT the self-
test. TEST the system for normal operation.
Yes
GO to E5.
No
REPAIR circuit 1069 (OG/LB) for a short to ground. CLEAR the DTCs. REPEAT the
self-test. TEST the system for normal operation.
Yes
REPAIR circuit 660 (YE/LG) for a short to voltage. CLEAR the DTCs. REPEAT the self-
test. TEST the system for normal operation.
No
GO to E6.
Yes
REPAIR circuit 1069 (OG/LB) for a short to voltage. CLEAR the DTCs. REPEAT the
self-test. TEST the system for normal operation.
No
GO to E7.
Yes
Page 16 of 45
12/30/2011