Brother DCP8080DN Service Update Information page 3

DCP8080DN, DCP8085DN, MFC8480DN, MFC8680DN, MFC8890DW
c. The paper in the tray should be visible through the opening where the DX Tray was
installed. Carefully lift the edge of the paper and then remove it through this opening.
d. Reinstall the DX Tray.
e. Turn the machine around and remove the paper tray.
3. Remove any paper remaining in the tray.
4. Verify that the three paper guides in the tray are set to the correct paper size.
5. Examine the left side of the tray to determine whether all of the components labeled below are
present and undamaged.
Gear 21-16
Gear 15
a. Each gear can be ordered as a separate part for replacement.
▪ Gear 15 – LM5245001
▪ Gear 21-16 – LM5246001
▪ Lift Gear 46 – LM5247001
"No Paper" Message and Clicking Noise
March 22, 2010
Page 3 of 15
SERVICE
UPDATE No.
Lift Gear 46
F1290