Brother DCP8080DN Service Update Information page 13

DCP8080DN, DCP8085DN, MFC8480DN, MFC8680DN, MFC8890DW
9. While holding the EG Actuator in place, slide the PE Actuator to the right to remove it from the
Separation Roller Drive Shaft. It may be necessary to rotate the actuator when removing it.
10. Align the replacement PE Actuator according to the image below and then slide it onto the
Separation Roller Drive Shaft until it interlocks with the EG Actuator on the left.
"No Paper" Message and Clicking Noise
March 22, 2010
Page 13 of 15
SERVICE
UPDATE No.
F1290