Table of Contents
Advertisement
０８／０９／２５ １３：１５：５１ ３１ＨＰ２６３０ ００４６
Leaks, Loose Parts
Cable
Check these items after you get on the ATV:
Throttle
Brakes
Engine Stop Switch
Steering
Remember, be sure to take care of any problem you find, or have your
Honda dealer correct it before you ride.
Is Your ATV Ready to Ride?
Walk around your ATV and look for anything
that appears unusual, such as a leak or loose
cable.
Check the cable housings for wear. Check the
fittings for looseness. Replace or tighten as
needed.
Check the freeplay and adjust if needed. Press
the throttle to make sure it moves smoothly
without sticking, and snaps shut automatically
when it is released, in all steering positions
(page
109
).
Squeeze the front and rear brake levers and
step on the rear brake pedal to check that the
controls operate normally. Check for proper
freeplay (pages 118
Check for proper function (page
Check that the wheels turn properly as you
steer the handlebar. Move the handlebar right
and left and check that there is no excessive
backlash.
−
123 ).
22
).
Before Riding
37
Advertisement
Chapters
Table of Contents
