Honda 2009 TRX90X Owner's Manual page 179

０８／０９／２５ １３：３１：５９ ３１ＨＰ２６３０ ０１７９
If You Have a Flat Tire
Installation
1. Position the wheel.
2. Position the wheel nuts.
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV to the
ground before tightening the nuts in a crisscross (rather than circular)
pattern to the specified torque:
40 lbf·ft (54 N·m , 5.5 kgf·m)
If a torque wrench was not used for installation, see your Honda dealer
as soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
170 Taking Care of the Unexpected