Correcting Distorted Sound; Resetting The Audio Functions; Setting The Security Indicator - Pioneer AVH-P5000DVD Operation Manual

Section
(~O----,p_e_r_at_in_g-=---th_i_s
_u_ni_t
~)
CiS
• You can only operate this function when
Bluetooth adapter (e.g. Co-BTB200) is con-
nected to this unit.
1 Touch NEXT on the initial menu.
2
Touch PINCODE INPUT.
PIN code input display appears.
3
Touch
0
to
9
to input the PIN code of
your Bluetooth audio player.
• To cancel the inputted numbers, touch C.
4 After inputting PIN code (up to 16 di-
gits), touch ENTER.
The PIN code you entered is stored in this sys-
tem.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
• Only when the multi-channel processor
(e.g., oEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch DIGITAL ATT to switch the digital
attenuator setting.
Touch DIGITAL ATT repeatedly until the de-
sired setting appears in the display.
•
HIGH - High quality sound
• LOW - Minimize distortion sound
Resetting the audio functions
You can reset all aud io functions except vo-
lume.
• Only when the multi-channel processor
(e.g., oEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2
Touch AUDIO RESET.
3 Touch RESET.
4
Touch RESET again to reset audio func-
tions.
• To cancel resetting the audio functions, touch
CANCEL.
Setting the security indicator
The LEO indicator (security indicator) will flash
when front panel is detached from the head
unit. You can turn this indicator on or off.
1 Touch NEXT on the initial menu.
2
Touch SECURITY INDICATOR to turn se-
curity indicator on.
• To turn security indicator off, touch
SECURITY INDICATOR again.
[!J
En
®