Table of Contents
Advertisement
5-2. Shading adjustment software
1. When DRIVE PCB is exchanged.
Step1. Get shading data from old Drive PCB.
Step2. Save the data to PC memory.
Step3. Exchange the Drive PCB.
Step4. Set the old data to new Drive PCB.
(Brfore Exchanging Drive PC Board)
1-1 Get the shading data from the projector
(1) Select [get] from [Projector] menu.
(2) Select commucation port and press [Go] button.
(3) After getting the shading data, the following message
appired. Press [OK] button.
1-2 Save the original shading data to PC
(1) Select [Save] from [File] menu.
(2) Input file name and press [Save] button.
(After Exchanging Drive PC Board)
1-3 Set the shading data to the projector
(1) When you load the data from PC, select [Load]
form [File] menu.
1-34
Advertisement
Table of Contents
