Electrical Adjustment - Toshiba TDP-ST20E Service Manual

Chapter 7

Electrical Adjustment

Preparation
< Test equipment >
1) Personal computer (Windows PC, OS: Windows 98SE, ME, 2000, XP)
2) Signal generating software
SINGOWS2000.msi (Installer) and V_Ramp.bmp (Bitmap file)
3) Cables RGB Cable
4) Remote controller
< For connection and setting of Personal computer >
1) Connection of personal computer
Connect the PC to computer input as shown in following Fig.1
2) Set the screen resolution and refresh rate to XGA (1024x768) 60Hertz.
Set RGB output of the PC to CRT.
< Fig.1 >
7-1
Chapter 7