ADMIN, USER1, USER2, USER3:
Selected Checkbox: The user can access the function.
Blank Checkbox: The user can not access the function.
USER NAME
Change the name of USER1, USER2 and USER3.
Click "ENTER" after naming.
SETUP
PASSWORD
Options are ADMIN, USER1, USER2 and USER3.
Select USER PASSWORD using the mouse or the remote control and press SEL
SETUP
button. Select user type and enter the current password. And, enter a new password,
enter the same password again to confirm and select OK. Then the message
"PASSWORD CHANGED" is displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
Set authority level of playback on each user.
AUTHORITY
OF PLAYBACK
Checked box: authorized to playback. Blank check box: no authority.
User can set 'disable' or the time from 5 minutes to 60 minutes
Remote
Disable – Remote user can playback with no limited time
Playback
5 to 60 minutes – Remote user can playback in the set time.
Timeout
Automatically disconnect when the set time is over
41