Wiring Diagram - IKEA LUFTIG Installation Instructions And Use & Care Manual

Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.
A. Light bulb socket
B. Lens cover
SE116B
Power Supply
Wattage Rating
White - Red
White - Black
B
A

WIRING DIAGRAM

Light Switch
On - Off
BK
WH
Motor Characteristics
120 VAC
Frequency
60 Hz
Amperage 0.9 ±10% A
50 ±10% Watts
Motor Resistance
22.3 ±10% Ohms
13.4 ±10% Ohms
3. Screw light bulb into socket.
4. Replace lens cover by squeezing cover and inserting tabs
into slots.
5. Reconnect power.
If new light does not operate, make sure the lamp is inserted
correctly before calling service.
Low - Off - High
BK
C19
N
Motor Switch
Ground
Screw
L GND
11