Table of Contents
Advertisement
• Make sure that the printer rests on a hard (non-padded) surface and that
there is sufficient ventilation.
• When positioning the printer, make sure its cables will not be damaged.
• Use the type of electrical power supply indicated on the printer label. If
uncertain, contact your dealer.
• Make sure the electrical system that supplies power to the printer is
equipped with a ground wire and is protected by a differential switch.
• If power is supplied to the printer using an extension cord, make sure
that the total electrical input of the connected devices does not exceed
the maximum current permitted by the type of extension in use or, in any
case, a maximum of 15A.
• Do not block the ventilation openings.
• Do not insert objects inside the printer as this could cause short-circuiting
or damage components that could jeopardize printer functioning.
• Do not spill liquids onto the machine.
• Do not carry out repairs on the machine yourself, except for the normal
maintenance operations given in the user manual.
• Make sure that there is an easily-accessible outlet with a capacity of no
less than 15A in the vicinity of where the printer is to be installed.
• Unplug the printer from the electrical mains and call a specialized
repairman if any of the following conditions should arise:
A. the power supply connector is damaged
B. liquid has spilled into the printer
C. the printer has been exposed to rain or water
D. the printer is not functioning normally despite the fact that all
instructions given in the user manual have been followed
E. the printer has been dropped and the cover is damaged
F. printer performance is noticeably reduced
G. the printer is not working
• Periodically perform scheduled maintenance on the printer to avoid dirt
build-up that could compromise the correct, safe operation of the unit.
UNPACKING THE PRINTER
Remove the printer from the carton, taking care not to damage the packing
materials which should be retained for future shipping/moving.
Make sure all components listed below are present and not damaged. If any
part is missing and/or damaged, contact customer service.
SMICE-PS
INTRODUCTION
2
Advertisement
Table of Contents
