Charge The Phone - Vertu SIGNATURE TOUCH User Manual

3. Finally, close the SIM door and lock into place (pictured). Then close the back cover.

Charge the phone

The internal battery needs activating prior to first use, and it is recommended to charge the battery at this
point as it may not have been supplied with a full charge. Connect the supplied USB data cable into the
charging port on the side of the phone. Then connect the other end of the cable to the USB port on your
Vertu mains charger.
!
Important: Use only chargers, cables and accessories supplied by Vertu.
If the phone indicates a low charge, do the following:
1. Connect the supplied wall charger to the wall outlet and then insert the microUSB connector into
your phone.
2. When the battery is fully charged, disconnect the charger from the phone and then from the wall
outlet.
© 2014 Vertu Corporation Limited. All rights reserved.
Getting started
12