Subaru 2004 Impreza Service Manual page 31

11) Remove the bolt. (model with bumper beam)
12) Remove the three bolts, then remove the
bumper beam. (model with bumper beam)
NOTE:
In the case of right side, remove the canister first.
Loosen the bolt, and then remove the bumper
beam.
13) Remove the five clips, and then remove the
bumper upper beam.
14) Remove the license plate light.
Rear Bumper
15) Remove the six clips, and then remove the
bumper side cover.
EI-00352
16) Remove the corner bracket from body.
17) Remove the lower bracket (center) from body.
(model without bumper beam)
EI-00353
18) Loosen the three bolts, and then remove the
lower bracket (side). (model without bumper beam)
NOTE:
EI-00412
On the right side, after removing the canister, loos-
en the bolts and remove the lower bracket.
EI-00472
EI-29
EXTERIOR/INTERIOR TRIM
EI-00532
EI-00473
EI-00474
EI-00475