Table of Contents
Advertisement
Over ow Opening
is located on the back
of the motor base. It
directs liquid away
from the motor in
case of a leak. If you
experience leaks, refer
to Tips and Techniques
on page 9.
Motor Base
Pulse Feature
is to the le of the stop position
on the Variable Speed Control
Variable Speed Control
is used to select blade speed
from 1 to 10 (low to high)
PA RTS A N D F E AT U R E S
Spill-Proof Vented Lid
with removable lid plug
(top rack dishwasher safe)
DO NOT use in a microwave)
40 ounce (1.2 L) Container
shatter-resistant container
(top rack dishwasher safe,
DO NOT use in a microwave)
Interlock Tab
Both containers have two
interlock tabs that must be
positioned in the cutouts in
the motor base for the motor
to operate.
Flip-Top Lid
The seal MUST be in place to
avoid leaks when using the
20 ounce (0.6 L) container as
a to-go cup.
(top rack dishwasher safe,
DO NOT use in a microwave)
20 ounce (0.6 L) Container
(top rack dishwasher safe,
DO NOT use in a microwave)
Seals
Two seals are supplied with your
blender. Refer to page 9 for more
information about seals.
(top rack dishwasher safe)
DO NOT use in a microwave)
Interchangeable Blade Base
is used to blend in with the 20 ounce (0.6 L)
and 40 ounce (1.2 L) containers
(top rack dishwasher safe)
DO NOT use in a microwave)
Tamper
is used to maintain circulation by preventing
air pockets in the 40 ounce (1.2 L) container.
See page 11.
(top rack dishwasher safe)
7
Advertisement
Table of Contents
