Black & Decker KR65LSR Original Instruction
Black & Decker KR65LSR Original Instruction

Black & Decker KR65LSR Original Instruction

Hammer drill
Hide thumbs Also See for KR65LSR:

Advertisement

6
5
4
7
8
9
10
3
2
1
Australia
New Zealand
UK
Ireland
1

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker KR65LSR

  • Page 1 Ireland Australia New Zealand...
  • Page 3: Intended Use

    Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker hammer drill has been designed for drilling Safety equipment such as dust mask, non-skid safety in wood, metal, plastics, and masonry as well as for screwdriving shoes, hard hat, or hearing protection used for purposes.
  • Page 4 Use of the power tool for operations different from those Removing and refitting the chuck (fig. C) intended could result in a hazardous situation. Open the chuck as far as possible. Remove the chuck retaining screw, located in the front part 5.
  • Page 5: Maintenance

    Using the laser unit Technical data The laser unit (9) is used for the alignment of several drill holes. Remove the unit from the tool. KR65LSR KR70LSR Refer to the manual of the laser unit for further instructions. Voltage Power input...
  • Page 6 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
  • Page 7 T Y P KR65LSR-KR70LSR 12 13 34 33 E13569 WWW.2helpU.com 12-03-03...
  • Page 8 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...

This manual is also suitable for:

Kr70lsr

Table of Contents